tosz 100110 www.vishay.com vishay draloric revision: 11-sep-15 1 document number: 22134 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 rf power barrel capacitors for dielectric heating equipment, r16 hq ceramic dielectric material capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. connection terminals: ? thread terminal, copper / brass, silver plated. allowable torque: m4 thread 3.5 nm (31 lbf in) ? m8 thread 6.0 nm (53 lbf in) finish capacitor body completely glazed. marking type designator, capacitance value and tolerance, rated peak voltage, ceramic material code, production date code, manufacturer logo, serial no. features these capacitors feature a q-factor of greater than 10 000 which makes them ideal in operating frequency range from 0.1 mhz up to 30 mhz where high voltages and currents are present. the tosz model can be used as replacement for fixed vacuum capacitors. th e construction gives the capacitors an advantage over fixed vacuum capacitors, because there is no possibility of vacuum deterioration. applications dielectric heating equipments in industrial segment capacitance range 50 pf capacitance tolerance 10 % ceramic dielectrics r16 high q (tcc + 100 ppm/k) rated voltage 30 kv p dielectric strength test 140 % rated ac voltage (30 000 v rms , 50 hz, 5 minutes) rf power test 125 % of rated power, for 5 minu tes in a test generator circuit dissipation factor max. 0.025 % (1 mhz) insulation resistance min. 100 000 m ? (at 25 c) operating temperature range -55 c to +100 c quick reference data description value ceramic class 1 ceramic dielectric r16 hq type tosz 100110 voltage (v p ) 30 000 min. capacitance (pf) 50 max. capacitance (pf) 50 mounting screw terminal
tosz 100110 www.vishay.com vishay draloric revision: 11-sep-15 2 document number: 22134 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) the surface temperature during op eration must not exceed +100 c sap part number and electrical data part number ceramic cap. values (pf) rated voltage (kv p ) rated power (1) (kvar) rated current (a rms ) bz100110wv50036cb1 r16 high q 50 30 up to 800 100 dimensions in millimeters (inches) derating diagram related documents general in formation www.vishay.com/doc?22071 60 60 m4 thread s center: m8 thread 40.0 0.3 (1.575 0.012) 110.0 0.2 (4.331 0.008) ? 101 (3.98 dia.) 1 10 100 1000 0.1 1 10 100 1 10 100 1000 fre q uency (mhz) 39.75 mhz 5.65 mhz u g q g i g i g (a rm s ) q g (kvar) u g (kv p )
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
